Engineering Publications Back to Resume
11. I.R. Young, B. Habibzadeh, A. Bhargav, G.S. Jackson, C.J. Tesluk, G.W. Brunson, and W.A. Whittenberger, "Ignition and Waste Heat Recovery through Catalytic Combustion of Reformate Exhaust in PEM Fuel Cell Systems," Fall Technical Meeting of Eastern States Section of the Combustion Institute, University of Maryland, College Park, MD, October 18-21, 2009. 10. William A. Whittenberger, Gordon W. Brunson, "Low Cost High Temperature Heat Exchanger Platform" (extended abstract), 2nd ASME European Fuel Cell Technology and Applications Conference, Rome, Italy, December 11-14, 2007. 9. Gordon W. Brunson, William A. Whittenberger, "Low Cost, High Temperature Heat Exchanger Platform for Fuel Reforming or Balance Of Plant Support in Fuel Cell Systems" (poster), Fuel Cell Seminar , San Antonio, TX, October 15-18, 2007. 8. Joseph E. Kubsh and Gordon W. Brunson, "EHC Design Options and Performance," SAE International Congress and Exposition, Detroit, MI, February 26-29, 1996. 7. R. Brezny, P.J. Westgate, G. Brunson, and E. Hughes, "Electrical Durability of an EHC," SAE International Congress and Exposition, Detroit, MI, February 27-March 2, 1995. 6. Gordon Brunson, J.E. Kubsh and William A. Whittenberger, "Combining Heated and Unheated Core Functions for Improved Cold Start Emissions Performance," SAE Fuels and Lubricants Meeting & Exposition, Philadelphia, PA, October 18-21, 1993. 5. G.W. Brunson, W.D. Booth, R. Carrera, W.F. Weldon, "Development of Preloading and Precooling Systems for a Single-Turn Ignition Tokamak," 9th Topical Meeting on the Technology of Fusion Energy, Oak Brook, IL, October 7-11 1990. 4. G.W. Brunson, W.F. Weldon, "Axial preloading of a 20 Tesla Prototype of a Single Turn Tokamak Toroidal Field Coil," 17th IEEE International Conference on Plasma Science, Oakland, CA, May 21-23 1990. 3. M.D. Werst, G.W. Brunson, K.T. Hsieh, R.L. Sledge, and W.F. Weldon, “Operation of a 20 Tesla On-Axis Tokamak Toroidal Field Magnet,” 17th IEEE International Conference on Plasma Science, Oakland, California, May 21-23, 1990. 2. M.D. Werst, G.W. Brunson, K.T. Hsieh, R.L. Sledge, W.F. Weldon, "Design of a Prototype 20 Tesla, Single Turn, Toroidal Field Coil for the Fusion Ignition Experiment (IGNITEX)," 13th IEEE Symposium on Fusion Engineering, Knoxville, TN, October 2-6, 1989. 1. Gordon Brunson, "Electromechanical Means of Implementing Self-Acting Gas Bearings Within Free Piston Stirling Cycle Machinery," 24th Intersociety Energy Conversion Engineering Conference, Washington, D.C., August 6-11, 1989. Back to Resume